Total Kar; Cars, Trucks and Mechanics

Time for brakes? Where should you go? Where do I start? What is the real problem? Are all brakes the same? Does it matter? What about brake fluid?

All these are good questions. Here are some good answers. For starters a braking system consists of different parts, all of which can have a problem… Let’s look at some main issues we can encounter:

For brake service, I do recommend going to an ASE Certified Garage/Technician. You may choose to do it yourself, but please be very careful, educate yourself on the procedures, there are a lot of small things you need to keep an eye on. There are a lot of free ’how to’ videos on the internet.

All brake pads and shoes are NOT created equal. Price is normally an indicator of quality and performance. There are several different materials brakes are made of. Organic, Semi-Metallic, Full Metallic, Ceramic and the newest Ferro-Carbon. It is best to find out what your vehicle had from the factory and stay with that quality and material. You can upgrade to a better pad, I never suggest down grading and putting a cheaper less quality brake pad/shoe on your vehicle.

When you step on your brake pedal and your steering wheel shakes back and forth, this normally means that the (main) problem lays more in your rotors; your front rotors are more than likely warped. They can be fixed, by putting them on a brake lathe and having them resurfaced. In order to have this operation performed there must be sufficient material left on the rotors. If there is not enough material (metal), then you must replace the rotors. As with everything, there is a price difference. Quality normally reflects price. Now if you feel the vibration in your seat or floor, then this normally means you have a warped rear rotor or out-of round rear brake drum. They rear drums or rotors can also be machined true if there is enough material. The same procedures hold true for the rear brakes also.

One other part that needs service I will mention short; getting your brake fluid flushed. Never heard of it? Well with conventional brakes the brake fluid never traveled through the system. However with Anti-Lock Brakes the brake fluid travels through the system and it can carry dirt and debris through the system, possibly reducing the performance of the Anti-Lock Brakes.

I hope this is a little help on understanding your vehicles braking system. If you have any questions please feel free to write.

Thanks for STOPPING by

Posted in Parts, maintenance | | No Comments »

Why do we ask this question? Is it lack of performance or lack of fuel economy? What is our perception of a tune-up?

Let me clarify some issues…  There is a difference between a gas or diesel engine.

There are two reasons for a tune-up.

1)      Maintenance

2)      Poor performance/Poor fuel economy

Understand that not all Vehicle makes and models require the same procedures. For the most part, every aspect of your vehicle is engineered to a certain standard, whether that be, how long certain wear items last or how long the vehicle will.

For all gasoline engines; tune-up items include, Spark Plugs, Spark plug boots, Air Filter and PCV valve. This is about the only common feature all gasoline engines share. However, some Makes and Models still have spark plug wires and replaceable fuel filters.

There is no more timing to be set, no adjusting the fuel system. Now everything has computer controlled fuel and ignition systems. Not a bad thing, just not commonly understood thing. So what I just described is a Maintenance Tune-Up

The aspect I will discuss is poor performance, whether it is no power or engine is missing. I advise caution on Assuming that a tune-up will fix your problem. Tell your technician the symptoms and concerns and let them diagnose your vehicles issues. I had a customer come in once that had spent $1500.00 on parts trying to fix a miss. When I got it, I diagnosed a bad computer connection, it had water in it. A spray of some electrical contact cleaner and pack the connector with silicon dielectric grease and it was fixed.

In conclusion, the upper percentage of vehicles on the road today are using platinum or iridium spark plugs. They will run 80-100,000 miles under normal service. I advise to have the exact same spark plug installed as from the factory. If fuel economy is your concern, also check your tire pressure and have your vehicle aligned once a year.

Drop me a question if I haven’t answered all your concerns

Thanks for stopping by…

Posted in Parts, maintenance | | No Comments »

Synthetic oil is far superior to conventional petroleum oil. When we look at the five basic properties of oil, lubricate, cool, clean, seal and absorb shock. Synthetic oil wins in all categories. So let’s start with a little history.

One of the first and foremost introductions of synthetic oil is from the Germans, World War II. Since they had virtually no petroleum, they were forced to come up with alternate’s means of lubrication for the machines of war.  In actuality they designed a better lubricant than the petroleum they were missing.

Now let’s look at the differences.

First: Lubrication- Superiority in synthetic oil is down to the molecular level. Basically petroleum oil is nature made and the structure of the molecules is uneven in size and position.  Synthetic oil was designed in a lab by scientist and the molecules are all the same size and the same position. This uniform molecular structure, gives the synthetic oil better lubricating properties because it gives more surface area for the parts to ride on, thus causing less friction and heat. The result of which is less wear and more power.

Second: Cooling- Synthetic normally flows more freely than conventional petroleum oil. In turn this allows the synthetic oil to carry heat away from engine parts faster than conventional. The other factor here is synthetic oil reduces friction heat to start with.

Third: Cleaning- Synthetic oil additives and base have better cleaning properties than conventional, partially due to their ability to resist acid build up from the engine, in turn not breaking the oil down.

Forth: Sealing- Synthetic oil normally aides in prolonging engine seals. Synthetic oils have very good cleaning capabilities, in some cases on higher mileage engines, we have seen synthetic oil clean the sludge out of a worn seal (we didn’t notice the seal was worn before because the sludge was holding the worn seal together).

Fifth: Absorb Shock- Engines are dynamic machines with a lot of moving parts. A lot of shock and load can be put on the components. The synthetic oil has a better film between moving parts, this more uniformed structure of the oil allows better support on the moving part and in turn helps in absorbing shock and distributing the load.

I personally run Amsoil in my vehicles, I have tested it extensively and I am impressed.  I run Amsoil in my turbocharged as well as my regular truck engine. It works exceptionally well in Diesel engines. I also have Amsoil synthetic in my transmission and rear differential. I have picked up 3-5 miles to the gallon and I have more power. Why, because synthetic oil frees up parasitic load (friction) the engine, transmission and rear differential uses to turn, in turn I get the extra power from the engine. I know when you spill it on the floor; it is a lot slicker than conventional oil, so be careful.

Well I hope this helps with any questions you may have had, drop me a line if you have a question.

Thanks for stopping by…

Posted in Fluids, Parts, maintenance | | No Comments »

Q: I have a 2000 Toyota truck with a full sized spare underneath the bed of the truck. I have never taken this tire off or had it checked.

Would you think the tire is still usable after 10 years? And I cannot imagine how hard it may be to get it
off after so many years.
What should I have done maybe years ago and what should I do at this point, since I may experience a flat some time?

A: A good question! This event plays out over and over.

Try to remove the spare, if successful, inspect the tire for any signs of cracks or dry rot. Inspect the valve core in the same manner. Inspect the tread, looking for any deviations. If you do not feel comfortable inspecting your tire yourself, take it to a reputable tire facility for professional inspection.

In the future if you find yourself with a new truck, opt for the full size spare option. Start a 5 tire rotation schedule, rotating your spare into normal use. This way you will wear down all the tires equally, get overall worn mileage on all of them. You get more mileage out of your tires (since you use one extra) and you won’t have to throw out a never used, dry rotted spare tire after a few years (which is a waste).

Posted in Parts, Questions, maintenance | | No Comments »

I am sure you have seen that some cars have headlights that are faded, dirty looking and yellowed. Maybe even your headlights look like this. Do you ever wonder why?

Headlights didn’t used to do this, so why does this happen nowadays? The main reason headlights become faded and yellowed is because now they are made of different types of plastic, instead of glass…

The plastic degrades easily by UV rays from the sun. There is another factor at plays here as well; the plastic is less chemical resistant, and picking up road grime only aides in the degradation process.

All this yellowing and fading does not allow a lot of light to shine through, in turn may reduce your ability to safely drive at night.

So what can you do about this yellow headlight issue? There are several options I can suggest depending upon the severity of the headlight lens degradation.

-          For light to medium degradation there are refinishing kits on the market. Refinishing is normally fairly easy. They typically consist of several very fine grits of wet sanding paper (1000 to 2000 grit) and a finishing polishing compound.

-         For more severe headlight degradation there are basically two options: send off for professional refinishing (you can find companies online that do this) or replacement. You can go with factory replacement or with an aftermarket company that makes new headlight assemblies for most cars, sometimes at fewer costs than factory OEM parts.

Thanks for stopping by

Posted in Parts, Safety, maintenance | | No Comments »